Koenic KTF 2321 M Mode D'emploi page 14

English
Installation
Fig. Place on a stable, level surface.
1
Fig. Connect the power plug to a suitable
2
electrical outlet.
Caution
The product may never be operated without
the stand or in a horizontal position.
Operation
To switch on the fan, press 1-3. To switch
Fig.
3
off, press 0.
0 Switch off
1 Low speed
2 Medium speed
3 High speed
Fig. Adjust it to the desired angle.
4
Caution
The guard must be completely closed when
operating the product.
During operation, do not put fingers or other
objects in the guard.
14
IM_KTF2321M_161109_V03_HR.indb 14
Cleaning and care
Caution
Before cleaning, always let the product come
to a complete stop and disconnect it from
the mains.
Please follow the dissambly instruction below.
Uninstall the screws to unlock the guard.
Fig.
5
Take off the front guard from the rear
Fig.
6
guard.
Fig. Uninstall the screw from the groove.
7
Fig. Remove the fan blade from the motor
8
shaft.
Fig. Use a soft piece of cloth for cleaning. If
9
the dirt or contamination proves hard to
remove, use mild detergent.
Note:
• Do not use solvents or abrasives, metal
utensils or hard brushes for cleaning.
• Do not immerse the fan in water or other
liquid. Do not allow water to drip on or into
the fan motor housing.
• Dry all parts thoroughly before storage.
Fig. After cleaning, assemble the fan in
10
reverse order of dissambly steps.
• Store the product in a cool, dry and clean
place, out of the reach of children and pets.
9/11/16 8:50 AM