Running The Initial Setup; Using The Tv Controller - Samsung GQ32LS03T Mode D'emploi

06 Running the Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you
to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network
connection, at one time.
• Before starting the Initial Setup, be sure to connect external devices first.
• To use the TV's smart features, the TV must be connected to the Internet.
• To perform Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.
• If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device,
continue setup manually after adding the TV using Add Device on the dashboard of the SmartThings app.
• The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
• Noise may occur temporarily when the TV communicates with mobile devices.
• TV setup has been optimised for Landscape mode.
You can also start the Initial Setup using the TV's menu (
Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your
viewing environment.

Using the TV Controller

You can turn on the TV with the TV Controller button at the top left of the TV, and then use the Control menu.
The Control menu appears when the TV Controller button is pressed while the TV is On. For more information
about its usage, refer to the figure below.
TV Controller button / Remote control sensor
• TV mode
• Art mode
The TV Controller button is located on the top left of the TV.
• In Art mode, the power indicator at the top left of the TV remains off.
English - 18
– Press: Move
– Press & Hold: Select
– Press: Switch to the TV mode
> Settings > General > Reset).
Control menu
: Power off
: Channel Up
: Channel Down
: Volume Up
: Volume Down
: Source