LD PREMIUM Vue-Line Manuel D'utilisation page 13

In the event of incorrect connection or misfunctioning, the amp will activate one or more of its LED to warn about
the problem.
SGNL TEMP
SGNL TEMP
SGNL TEMP
SGNL TEMP
SGNL TEMP
PMS ICL
PMS ICL
PMS ICL
PMS ICL
PMS ICL
TROUBLESHOOTING:
CORRECT fUNCTION
SGNL lights to indicate signal presence.
ICL
The Intelligent Clip Limiter is operating (see page 10).
NO SIGNAL
No Input Signal is reaching the amp.
OvERHEATING
The amplifier has reached the maximum operational
temperature. Most common cause is: the normal air flow
is blocked, accumulated dirt, dust or object leaning against
the grill. Check and clean periodically.
PMS
Several causes can trigger this LED, most common are:
- The amplifier is in power-on sequence,
where output is inhibited until the amp
circuits are ready to operate.
- The internal temperatures rise to near
thermal shutdown point due to unfavourable
operating conditions.
- Excessive mains current consumption.
13