Avent naturally EXPRESS Mode D'emploi page 3

AVENT Express Bottle and Babyfood Warmer
US
Please read through these instructions
carefully before using your AVENT Express
Bottle and Babyfood Warmer for the first
time. Please retain for future reference.
These instructions are also available on
our website.
The AVENT Express Bottle and Babyfood
Warmer allows you to warm all AVENT
feeding bottles and AVENT Magic™ Cups,
as well as baby food jars and cans, safely
and quickly.
The speed at which the Warmer heats the
milk or food will depend on the size of
the bottle or container and the starting
temperature of the milk or food (ie. room
temperature 20 °C or out of fridge 5 °C).
The guide at the beginning of this leaflet gives
an indication of the time you can expect the
Warmer to take. Always test the temperature
of food before feeding to your baby.
Instructions for Use
For AVENT Feeding Bottles
1) Ensure basket is in place inside
the Warmer.
2) Place the assembled, filled bottle in the
Warmer with the dome cap removed.
3) For 4 fl oz ⁄ 125 ml bottles, fill the
Warmer with water to just above the
level of milk in the bottle.
4) For larger bottles, fill the Warmer to
15 mm (1⁄2 inch) below the rim of
the Warmer.
4
5) Never let the water level rise above the
neck of the bottle or spill over the edge
of the Warmer.
6) Plug the unit into an electrical outlet and
click the switch to the ON position (I), the
neon light will illuminate. Turn the dial to
setting 3.
7) When the bottle has been in the Warmer
for the appropriate time (See guide), the
light will flash on and off intermittently
to indicate that the water surrounding
the bottle is being kept at a constant
temperature.
8) Remove immediately. Replace the dome
cap. Shake the bottle and test the
temperature of the liquid by sprinkling
a few drops onto your wrist.
9) If the food is not ready, replace the bottle
in the Warmer. TAKE CARE NOT TO
OVERHEAT. The water surrounding the
bottle will be kept at a constant
temperature but the temperature of the
food will continue to increase. If the food
is too hot, allow to cool. Always test
temperature before feeding.
10) Once the bottle has reached the correct
temperature and has been removed from
the unit, switch off warmer (O) and
unplug from the electrical outlet.
Note: The basket can be removed when
heating the AVENT Magic™ cup and other
makes of bottles.
For the AVENT Disposable System
1) Ensure basket is in place inside
the Warmer.
2) Place the assembled, filled Disposable
Nurser in the Warmer with the dome
cap removed.
3) Fill the Warmer with water to the level
of milk in the bottle liner.
4) Plug the unit into an electrical outlet
and click the switch to the ON position
(I). The neon light will illuminate.
Turn the dial to setting 2 and continue
as 7–10 above.
Note: Do not attempt to heat milk
in the Disposable bottle liners on a
higher setting as this could cause the
bags to burst.
The Warmer can also be used to warm
breast milk in the AVENT Disposable
System in the same way.
For baby food jars
1) Ensure basket is in place inside the
Bottle Warmer.
2) Remove the lid and place jar or can
in the Warmer.
3) Fill the Warmer with water to 15 mm
(1⁄2 inch) below the top of the jar.
4) Plug the unit into an electrical outlet
and click the switch to the ON position
(I) Turn the dial to setting 3.
5) The Warmer will work in the same way
as for feeding bottles. Take care when
removing the jar as it, and the water
surrounding it, will be hot. Stir the food
and test it on a spoon yourself to ensure
it is not too hot for your baby. TAKE CARE
NOT TO OVERHEAT.
6) If the food is not ready, replace the jar in
the Warmer. The water surrounding the
jar will be kept at a constant temperature
but the temperature of the food will
continue to increase. TAKE CARE NOT
TO OVERHEAT. If the food is too hot,
allow to cool. Always test temperature
before feeding.
7) Once the feed has reached the correct
temperature and has been removed from
the unit, switch off (O) and unplug from
the electrical outlet.
Note: For small jars you can place
a screw ring from an AVENT Bottle
below the jar before adding the water
so that you can remove the container
more easily.
Care of your Bottle Warmer
Switch off (O), unplug and allow to cool
before cleaning. Remove basket and wipe
inside and outside with a damp cloth only.
DO NOT USE AN ABRASIVE CLEANER.
In order to reduce limescale build up, you
can use pre-boiled or distilled water in
your Warmer.
US
5