Important Safety Instructions; Technical Specifications - IVT DR-2000 Notice D'utilisation

OPERATING INSTRUCTIONS
INTRODUCTION
Dear customer,
Thank you very much for the trust you have placed in us. You have acquired a reliable high-quality product,
which will give you pleasure for a long time if you handle it properly.
Please read these instructions for use thoroughly and completely prior to putting the device into operation.

IMPORTANT SAFETY INSTRUCTIONS

• This device has 230 VAC at the output and must never be used by children. Attention! Risk of fatal injury!
• The use of the product under unfavourable environmental conditions must be avoided under all circumstances.
Unfavourable environmental conditions include: ambient temperatures above 50 °C, flammable gases, solvents,
vapours, dust, relative humidity in excess of 80 %, and moisture.
• The device must only be operated in dry and closed rooms.
• If there is reason to believe that safe operation is no longer possible, the device must be switched off
immediately and secured against unintentional operation. Safe operation can no longer be assumed if the device
is not functioning, has visible damage, has been damaged in transport, or after storage under unfavourable
conditions.
• Service and repairs may only be carried out by authorized and qualified personnel. Only original components
with the cited value must be used as spare parts.
• Only devices with a max. output of 2000 VA may be used with the power regulator.
• Devices which are obviously defective may not be used with the power regulator.
DESCRIPTION OF FUNCTIONS
This control unit allows for adjusting the speed of a variety of devices continuously and jerk free. In accordance with
the principle of power readjustment you thus achieve an optimum and constant speed of your tools, also under
various loads. This makes the unit perfectly suitable for operating drills, grinding devices, handsaws and jigsaws thread
cutter, milling machines or also for dimming headlights, infrared lamps and radiators.
OPERATION
1. Connect the speed regulator to the 230 V mains.
2. Connect the electrical consumer to be regulated in switched-off condition
to the socket of the speed regulator.
3. Now, switch on the electrical consumer.
Set the desired speed on the speed regulator.

TECHNICAL SPECIFICATIONS

Input voltage:
Continuous power output:
Control range:
Control:
Protection type:
Power cable:
Dimensions:
Weight:
ENVIRONMENTAL PROTECTION NOTE
At the end of its useful life, this product must not be disposed of together with normal household
waste, but has to be dropped off at a collection centre for the recycling of electrical and electronic
devices. This is indicated by the symbol on the product, on the instruction manual or on the
packaging. The materials of which this product is made are recyclable pursuant to their labelling.
With the reuse, the recycling of the materials or other forms of scrap usage you are making an
important contribution to the protection of the environment. Please ask your local administration
office for the appropriate disposal centre.
Technical specifications are subject to change. We assume no liability for typographical errors. V2_03/2017
IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, D-92242 Hirschau
Phone: 09622-719910, fax: 09622-7199120; info@ivt-hirschau.de;
230 V AC 50 Hz
max. 2000 VA
10 – 230 V AC
Phase angle control
IP40
1.35m
190 x 112 x 75mm
1.050g
3
Speed regulator DR-2000
www.ivt-hirschau.de