Kathrein K Power Saving EXE 159 Mode D'emploi page 10

Sat-IF distribution system (4 x Sat-IF)
Single-cable multi-switch
Features
Cascadable single-cable multi-

switches for distribution of digital
Sat-IF signals (four Sat polarities) and
terrestrial signals via one cable to up to
nine receivers
No limitation in the number of

programmes - the complete
programme range of one satellite is
distributed
The selected transponder is trans-

mitted by the multi-switch on a fixed
frequengy (userband), controlled by the
receiver with a DiSEqC™ command
set conforming to EN 50494
 The multi-switch supports the
extended single-cable set of
commands SCD2 conforming to
EN 50607
 Terrestrial signals can be received even
when the satellite receiver is switched
off
Each receiver is assigned a fixed

subscriber frequency (userband); a
twin receiver requires two subscriber
frequencies
 PIN Code: Protects the user frequency
from being accessed by another user.
This allows installation in an apartment
building
EXE 159
geeignet für DVB-T
EXE 259
Vous trouverez la
version française du
document sur:
Una versione italiana
di questo documento è
reperibile su:
Encontrará la version
española de este docu-
mento en la página:
1 / 8
20510063
20510064