Kathrein K Power Saving EXE 156 Mode D'emploi page 10

Sat-IF distribution system (4 x Sat-IF)
Single cable multi-switch
Features
 Cascadable single-cable multi-switch for
distribution of Sat-IF signals (four SAT
levels) and terrestrial signals via a single
cable to up to six receivers
 No restriction on the variety of chan-
nels - the complete range of channels
from a satellite is transmitted
 The selected transponder is pre-set by
the multi-switch to a fixed frequency
(user band), controlled by the receiver
using a DiSEqC™ command set to
EN 50494
 The multi-switch supports the extended
SCD2 single cable command set to
EN 50607
 Terrestrial signals can be received
even when the satellite receiver is swit-
ched off
 Each receiver is assigned a fixed
subscriber frequency (UB 1 to UB 6)
(a twin receiver requires two subscriber
frequencies)
 PIN code: Protects the subscriber
frequency against access by other
subscribers. This enables installation
across more than one apartment
Info LED display for the LNB supply

voltage and understanding of a
DiSEqC™ command
 The integral AGC (Automatic Gain
Control) ensures that the Sat-IF signals
have a constant output voltage
EXE 156
EXE 256
geeignet für DVB-T
44
44
Vous trouverez la
version française du
document sur :
Una versione italiana
di questo documento è
reperibile su:
Encontrará la version
española de este docu-
mento en la página:
1 / 8
20510101
20510102
63.5
112
63.5
112