Masterlock P005CML Mode D'emploi page 2

How to set your combination
You can set your own personal combination by following these instructions:
The opening combination is preset at 0-0-0.
Turn the dial to the preset combination 0-0-0.
1
Remove the lower tray from the lock box to expose the
2
lock reset button on the back of the lock mechanism.
3
Move the reset button to position A.
Turn the dials to set your desired
4
combination. Write down your combination
immediately so you don't forget.
Move the reset button back to position B.
5
The lock will now open to your own combination.
To change your combination repeat steps 1-5 above.
NOTE: There is no override code for this lock box.
Store your code at www.masterlockvault.com to avoid being locked out.
How to install tethering cable
Open the lock box.
1
Wrap the cable around the object inserting the end of
2
the cable through the loop in the cable. (A)
Put the end of the cable (non-loop end) in the slot
3
on the back left corner of the lock box. (B)
Close lid and lock the box.
4
Registration:
To be eligible for warranty coverage, the original purchaser must register the product
online at http://www.registermysafe.com/.
2
A
B
English