Troubleshooting; Table: Malfunctions And Possible Causes - domoova DFW50 Manuel D'utilisation

EN

Troubleshooting

Please contact DOMOOVA technical department in the following
cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.

Table: Malfunctions and possible causes

To prevent breakdowns, regularly empty and clean the water tank
and check the rotating disks and cleaning pads.
No Malfunction
The appliance
01 does not
switch on.
The motor
02 has stopped
working
Cause
1. Battery level is low.
2. Overheating.
1. Overheating. The
appliance is in safety
mode.
2. Battery level is low.
14
Solution
1. Charge the appliance's
removable battery.
2. Wait a few minutes
so that the appliance
returns to a normal
temperature.
1. Wait a few minutes
so that the appliance
returns to a normal
temperature.
2. Charge the appliance's
removable battery.