Step on the device evenly near the center and keep your body still and erect until the
device stabiles your weight.
When the weight has been correctly measured, the weight will appear on the LCD display
, flash 3 times indicating correct measuring.
A
Or you can press the "SET" button
shows "0.0" indicating it is ready for use.
When the LCD display
The device will automatically switch off after ± 10 seconds.
Weight – body fat – hydration – muscle bone & kcal percentage
The device is equipped with a BIA (bioelectrical impedance analysis) technology, to
measure body fat, hydration, muscle and bone percentage, by sending a (safe) low tension
current through the body. The difference of electrical conductive property of body fat from
other tissues is analyzed and processed and results are displayed on the LCD screen.
Setting your personal data
Press the SET key
With the ▲
C
or ▼
Program number
The device can store maximum 10 personal programs.
Press the SET key
On the LCD screen
number (P0 – P9) to store your personal data. Once the desired program number appear,
press SET
to confirm.
E
Gender
When the LCD screen
the correct gender has been selected, press SET
Age
When the LCD screen
the age (18 - 100). Once the desired program number appears, press SET
Length
When the LCD screen
the length (100 – 220 cm). Once the desired program number appears, press SET
confirm.
Just select your program code when you use the device again and your information will be
displayed, so there is no need to set them again.
E
shows "Err", it is indicating the device is in overload protection.
A
E
to set your personal data.
D
button you can select the desired number or selection.
E
A
"P0" will flash. Press ▲
A
flashes
or
A
shows "00" and "age" are blinking, press ▲
A
shows "100" and "cm" are blinking, press ▲
on the device and wait until once the LCD display
C
or ▼
press ▲
C
or ▼
to confirm.
E
EN-5
D
the select the desired program
D
to select the gender. Once
C
or ▼
C
or ▼
A
D
the set
E
to confirm.
D
the set
E
to