MA grandMA3 Guide Rapide page 20

Turn on the console
1. Unpack the device.
2. Remove the packaging, cushioning material, and dust cover.
3. Place the device indoors on a stable surface.
4. Connect external monitors to the console using a native DisplayPort connector.
5. Start the grandMA3 console:
-Insert powerCON TRUE1 into the corresponding jack.
-Connect the main power plug.
-Turn on the power switch (set it to position I.)
-The power switch lights up in red.
-Press the power key on the front panel.
-The device starts booting.
-The Mode Selection dialog appears.
-Tap to select a mode.
20
Intended Use
Safety
Support
Transport
Limitations
Quick Start
Maintenance
Disposal
Technical Data
Pixel Faults
Declaration of Conformity