Publicité
HOOKUP DIAGRAM
Here are some examples for setting up the PW4EX to enhance your live sound.
Acoustic Instruments
Passive Instruments
With Active Preamps
With 1/4" Output
Line Level Audio
Preamp/DI for
Tone Shaping
Mic
(Optional)
Powered
Speaker
or
Powered
Monitor
Powered
Speaker
or
Powered
Monitor
POWERLINK Circuit of
Any PW Product
PW4EX Specifications
Accepted Inputs
Mic XLR Balanced, Line Level 1/4" Unbalanced
Frequency Response
48 Hz to 23 kHz
Signal to Noise Ratio
74 dB
21 dB
System Gain @ 1 kHz
38 dB
Channel EQ (high, low)
2.6 kHz and above, 0.9 kHz and below
IN: Accepts a pre-master volume signal from
another PW4EX or PW50/100/150product, or a
line level input from another audio product.
POWERLINK
OUT: Exports a pre-master volume signal to
another PW4EX or PW50/100/150product.
Phantom Power
17 V
Power Requirements
18 Vdc
PRODUCT WEIGHTS & DIMENSIONS
2.2 lbs (including adapter)
9.75" (L) x 6.375" (W) x 2.375" (H)
1 kg (including adapter)
24.5 cm (L) x 16.2 cm (W) x 6.2 cm (H)
Nominal line level of -10 dBV.
Channel volume knobs set at 3/4 full scale
All controls set at maximum, output at maximum
unclipped level, bandwidth 22 kHz
Line input to master output
MIC input to master output
Low boost/cut: +/- 9.8 dB at 63 Hz
High boost/cut: +/- 7.0 dB at 8.0 kHz
Recommended use: Daisy chaining to another PW4EX
for expanding the number of channels.
Recommended use: Linking to any PW50 / PW100 /
PW150 powered speaker or daisy chaining to another
PW4EX.
Available on all MIC inputs. Current limited to 5 mA.
Wall adapter is included.
Publicité
