Ruby PURE 75 PLUS Mode D'emploi page 22

MAINTENANCE AND CLEANING INSTRUCTION
Please remove plug from the socket
before cleaning and maintenance.
• Cleaning the body for this device by damp cloth, then wipe it dry.
• If machine is too dirty, neutral detergent can be used for cleaning, but
please dilute the detergent before use
• Do not clean the unit with the solvent listed on the right which may
cause distortion or discolour.
Methods for
replacing UV lamp
• Photo sensor is built-in the device, if the UV
light is very weak or not lighted, the UV icon on
the product operating panel will be flashing; it
means UV lamp should be replaced.
The diagram as following:
Indicator for replacing
UV lamp
22
Disassembly and installation for UV lamp
• Take off the filter cover, and take out all filters,then UV lamp can be replaced.
The diagram as following:
Disassembly of UV lamp
Hold the UV lamp and rotate it for 90
clockwise or anticlockwise, then take it
out.
Installation of UV lamp
Hold the UV lamp and rotate it for 90 clockwise or
anticlockwise, then install it well.
Ecological Intelligent air purifier