Safety Instructions - ECG ZS 1020 Mode D'emploi

HAIR CLIPPER

SAFETY INSTRUCTIONS

Please read carefully and keep for future reference.
Warning: The safety measures and instructions contained in this manual
do not include all potential conditions and scenarios. The user must
understand that common sense, caution and care are factors that cannot
be integrated into a product. Therefore, the user is responsible for these
factors when using and operating this appliance. We are not liable for any
damages caused during shipping, by incorrect use, voltage fluctuation or
the modification or adjustment of any part of the appliance.
To protect against the risk of fire or electric shock, basic precautions must be
GB
taken while using electrical appliances, including the following:
1. Before you first connect the clipper to the power supply, make sure
that the voltage in your outlet corresponds with the voltage of the
powered device. The outlet must be installed in accordance with the
applicable electrical norm according to EN.
2. Do not use the clipper in places with high temperature and relative
humidity exceeding 80 %.
3. If the attachments or blades are damaged, do not use the clipper under
any circumstances.
4. Do not use the clipper to trim the fur of pets.
5. Keep the blades clean and lubricated.
6. Never leave clipper connected to power unattended.
7. Always turn off the clipper when you pause cutting.
8. The cable must not touch hot objects and hot surfaces, it must not be
submerged in water, it must not run over sharp edges and it must not be
used for carrying the appliance.
9. When unplugging the clipper from the outlet, never pull the cord, always
grasp the plug and gently pull it out of the outlet.
10. Do not immerse the clipper and the power cable in water or any other
liquids.
11. Do not touch the power cable or the clipper with wet hands.
24