NHT Xd Notice D'utilisation page 3

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9. POWER CORD PROTECTION
Power cords should be arranged so they do not interfere with the movement of objects in the
room: people, fan blades, utility carts, etc. Also, care should be taken that the cord is not
pinched or cut, and placed so it is not in danger of being pinched or cut, as in under a rug,
around a tight corner, etc.
10. POWER CORD GROUNDING
The power supply cord is of a three wire grounded type, designed to reduce the risk of electric
shock sustained from a live cabinet. It is assumed to be of suitable length for most uses of the
equipment. The use of extension cords and power strips is discouraged unless they are of
suitable rating to deliver the required total current for safe operation of all connected equipment.
Furthermore, extension cords or power strips must provide the same three wire grounded
connection. It is important that the blades of the equipment plug be able to fully insert into the
mating receptacle. Never remove the round grounding pin on the plug in an attempt to mate to
a two wire ungrounded receptacle: use a grounding adapter with the grounding tab or wire
suitably connected to earth ground.
11. NON-USE PERIODS
During periods of extended non-use, the power cord should be unplugged from the power
source.
12. CLEANING
The equipment should be cleaned only as detailed in the operating instructions.
13. OBJECT AND LIQUID ENTRY
Care should be taken so that objects and/or liquids, such as cleaning fluids or beverages, are
not spilled into the enclosure of the equipment.
14. DAMAGE REQUIRING SERVICE
NHT equipment should be serviced by qualified service personnel when:
A. The power supply cord or plug has been damaged, or
B. Objects have fallen onto, or liquid has been spilled into the equipment, or
C. The equipment has been exposed to rain, or
D. The equipment does not appear to operate normally or exhibits a marked change in
performance, or
E. The equipment has been dropped, or the enclosure has been damaged.
15. SERVICING
The user should not attempt to service the equipment beyond that which is described in the
operating instructions. All other service should be referred to qualified service personnel.
16. CARTS AND STANDS
The equipment should be used with carts or stands only of sufficient strength and stability for
the use intended.
An equipment and cart combination should be moved with care. Quick stops and starts,
excessive force, and uneven surfaces may cause the equipment and cart combination to topple.

Publicité

Table des Matières
loading

Table des Matières