Charging The Battery - Minox DCM 5.0 Notice D'utilisation

Slide the battery into the battery compartment with
the metal contacts head fi rst and close the battery
latch. Close the battery compartment.
Your photos will remain safely stored in the camera
memory or on the SD card even if the batteries are
removed or replaced.
Battery lock
22

Charging the battery

Connect the switched off Camera Module using
the provided USB cable to the USB connection of
your computer. This starts the charging process
automatically. While the battery is being charged
a green lamp lights up in the proximity of the USB
connection.
Charging is completed when the lamp
extinguishes.
Switching your Camera Module On / Off
To switch the camera on press and hold the Mode
button ON/MODE.
To switch your camera off, press the Mode button
until the Setup menu appears. Press the Down but-
ton until Power Off is selected and then press the
Select button to switch the camera off. By default
the DCM will automatically switch itself off if it is not
used within 60 seconds, thus saving battery power.
* see schematic diagram on the fl ipped-open side.