ECG XMS 333 U Mode D'emploi page 41

Snooze function
The snooze function allows you to delay the active alarm by 9 minutes. If you want to do so, press the button
SNOOZE once when the alarm is active. The alarm stops and starts 9 minutes later. During this time the alarm
clock icon ashes. If you want turn o this function, press related button ALARM (1 or 2).
Sleep function with music (from the remote control)
This feature allows you to set a countdown, after which the device will automatically switch to standby mode.
Press repeatedly the button SNOOZE during listening on the remote control and select the required time
•
when the device should automatically shut o .
• You can select 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. The display shows "SLEEP".
If you want to check the remaining time until shut o , press SNOOZE once.
•
If you want to cancel the function, press SNOOZE repeatedly, until the display shows "00". The indicator
•
"SLEEP" disappears from the display.
Equalizer setting
While listening, you can change the setting of the equalizer by pressing repeatedly the button EQ. You can
choose between the Flat, Rock, Classic, Pop, Jazz modes.
Radio
1. Turn on the device as described above.
2. Press repeatedly the button FUNCTION to select "RADIO". The display shows a radio frequency.
3. Press repeatedly the buttons
4. If you want to nd automatically the closest available station, press and hold for 2 seconds the button
or .
5. If the station broadcasts stereo, you can press FM ST to achieve the highest quality sound. If the station
broadcasts mono, it is better to switch o FM ST.
6. For optimal reception quality extend as much of the FM antenna as you can.
Presets of radio stations
You can store up to 20 radio stations in the system memory.
1. Tune in the station, which you want to save.
Press and hold for 2 seconds the button PRESET. The number of the preset starts ashing (e.g. "P01").
2.
/
3. Use buttons
the currently played station.
Press repeatedly PRESET to con rm your selection.
4.
5. Store other presets by repeating steps 1 to 4.
If you want to retrieve the station saved in the memory, press repeatedly PRESET until the required preset
6.
is tuned in.
CD control
Disc playback
Turn on the device and press FUNCTION to select the CD mode.
1.
EJECT to open the disc tray.
2. Press
3. Insert the disc by pushing outward.
4. Press again the button
5. The device reads the disc and displays the total number of tracks.
Press PLAY/PAUSE
6.
7. If you want to pause the playback (pause) press the button PLAY/PAUSE
playback.
If you want to stop playback, press the button STOP x.
8.
XMS 333 U_manual_cz_sk_pl_hu_de_gb_hr_si_sr_fr_it_es_et_lt_lv.indb 41
/
to select the required radio station.
to select the required number of the preset from P01 to P20 where you want to save
EJECT to close the disc tray.
to start playback.
once. Press again to continue
41
41
17.07.2016 16:10:31
GB