MartinLogan Mikros 90 Mode D'emploi page 10

SPECIFICATIONS (subject to change without notice)
Frequency response . . . 6–22,000 Hz
Impedance . . . . . . . . . . . 26 Ohms with cable
Maximum output. . . . . . 112.83dB SPL
Sensitivity . . . . . . . . . . . . 98dB (at 1kHz with 1mW input)
Max input power. . . . . . 300mW
Transducer . . . . . . . . . . . 35mm dynamic driver
Noise isolation . . . . . . . 92.05% (-22dB SPL, at 1kHz with 1mW input, 30cm)
Weight. . . . . . . . . . . . . . . 163g (5.75oz.)
Connector . . . . . . . . . . . . Right angle gold-plated 3.5mm (1/8") 4-conductor plug
Cord . . . . . . . . . . . . . . . . . 4 foot (1.2m) cable
SPECIFICATIONS: MICROPHONE (subject to change without notice)
Frequency response . . . 180Hz–10kHz (-5dB; 3dB)
Pickup pattern . . . . . . . . Omnidirectional
Sensitivity . . . . . . . . . . . . -42dB (as per 121 R 9-5)