Function Mode - Brydge W-Type Mode D'emploi

CONNECTING (PAIRING)
1. Slide the power switch on the back of the keyboard from OFF to ON.
2. Press and hold one of the four Bluetooth buttons on the keyboard until you see a flashing blue light under the key.
3. Go to Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth and select
Brydge W-Type.
Note: The Brydge W-Type can be paired with up to four devices but can only be used with one device at a time. To
switch between devices, tap the relevant Bluetooth key to select the appropriate device.
CHARGE
To charge your Brydge W-Type, insert the supplied USB-C cable into the charging port on the back of the keyboard.
The battery is charging when the Bluetooth 1 key flashes red. The flashing will stop when the battery is fully charged.

FUNCTION MODE

The Brydge W-Type is preset in media mode where you have control of play, pause, volume and other features. To
access function keys (F1-F12), switch to function mode by pressing the function and esc keys at the same time.
HAVE A QUESTION? Visit www.brydge.com/support