Victron energy 2000W 115/230V 18/9A Manuel page 5

2.1.1 Pass the shore-side cable through the left side cable gland, at the
bottom of the cabinet.
Pass the AC-output cable through the right side cable gland.
2.1.2 Connect the shore cable to the terminals indicated with "INPUT".
Connect the green/yellow wire to PE.
Connect the brown wire to L and connect the blue wire to N.
2.1.3 Connect the load to the terminals indicated with "OUTPUT".
Connect the green/yellow wire to PE.
Connect the brown wire to L and connect the blue wire to N.
2.1.4. Connect the enclosure to ground (= all the metal parts in the boat).
This is achieved by establishing a ground connection to the M4 stud on the
bottom of the enclosure.
2.1.5 Use the following minimal cable cross sections:
2000W model:
115/120V
230/240V
3600W model:
115/120V
230/240V
2.5mm² AWG 13
1.5mm² AWG 16
6mm² AWG 10
2.5mm² AWG 13
3