INSERT/REMOVE
IMPORTANT
Remove non-Brydge screen protectors before attaching your Brydge keyboard. This will
ensure a perfect fit and eliminate unnecessary pressure to your screen when inserted into
the hinges.
TO INSERT: Place your Brydge on a flat surface and set the hinges upright to 90 degrees.
Insert your iPad into the hinges with the home button on the right, one side at a time.
If your iPad is loose, remove it and gently squeeze the hinges. Repeat this process until
your iPad is held firmly.
TO REMOVE: Ensure your Brydge is on a flat surface.
Place your hand towards the back of the keyboard and pull up, one side at a time.
POWER
TO TURN ON: Press the power key for one second until the LED flashes green.
TO TURN OFF: Press and hold the power key for three seconds until the LED flashes red.
NOTE: To conserve battery, your Brydge will enter sleep mode after 20 minutes of non-use.
Press any key to turn back on. Your Brydge will enter sleep mode when both devices are
closed like a laptop.
PAIR
TO PAIR: Press and hold the Bluetooth key for three seconds until the LED flashes blue. On
your iPad, under Settings > Bluetooth select Brydge 7.9.
When successfully paired, the blue LED will turn off.
CHARGE
NOTE: If battery life is below 15%, backlit key functionality will be disabled to conserve
battery.
TO CHARGE: Insert the charging cable into the keyboard and plug the other end into a
power source. A solid red LED indicates the Brydge is charging.
When the keyboard is fully charged, the red LED will turn off. A full charge can take up to
three hours.
KEYBOARD SHORTCUTS
Copy
Paste
Command + C
Command + V
Home Screen
Switch App
Command + H
Command + Tab
Switch Language
Ctrl + Shift + Spacebar (Spacebar allows you to toggle through available languages)
WARRANTY
Thank you for purchasing a Brydge product. This product comes with a 1-year limited hardware warranty on the terms
and conditions set out in this document and at www.brydge.com/warranty. All Brydge warranties are non-transferrable
and are only available to the original end-user of the product. Warranties do not apply to products purchased from online
vendors unauthorized to sell Brydge-branded product. If a defect arises during the warranty period, cease using the
product and contact Brydge. To obtain warranty service, visit www.brydge.com/support or call +1 (435) 604-0481. Brydge,
at its sole discretion and option, will (1) repair the product at no charge using new parts or parts that are equivalent to
new in performance and reliability, or (2) replace or exchange the product with a product of equivalent functionality and
value. Brydge offers free return shipping on any approved warranty claims. A shipping label will be provided to you if you
are within the United States. If you are outside the United States, Brydge will reimburse your return shipping to a maximum
of US$15.00 after providing a copy of the shipping receipt.
Australia Only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Brydge Technologies LLC | 1912 Sidewinder Dr., Suite 104, Park City, UT 84060 USA
HAVE A QUESTION? Visit www.brydge.com/support
Cut
Command + X
Show Dock
Command + Option + D
Settings
On
Underline
Italic
Command + U
Command + I
Search
Undo
Command + Space
Command + Z
Connected