Important - Orca 300 CL Notice D'utilisation Et D'entretien

2.0 OPERATING INSTRUCTIONS FOR POOL CLEANERS

2.1 Important !!

a. To immerse the cleaner
Put into or lift out of the pool with the cleaner bottom towards the wall to avoid any possible
scratches to the pool. Hold the top handle and power on the cleaner. The cleaner will start working
after emptying trapped air inside (about 20s), then the cleaner can immerse into the pool floor.
b. To get the cleaner out of the water
The cleaner will self-beach when finishing working, then use the hook to lift it out of the pool.
c. To avoid damaging the pool wall or the cleaner, make sure that the cleaner does not touch it
while you remove it from the pool.
d. Before removing the cleaner from the pool, it is best to hang it 10 - 15 seconds above the pool
to drain it of water.
e. Turn off the cleaner after each use.
MANUAL_CLEANER_300CL_indA_1219 Page 15 sur 86