UPPER BOUNCE UBRTG01-1017 Manuel D'utilisation page 9

Step
5
Assemble the Frame
Connect the top rails B1 and B2. Attach part A- the long side of the trampoline, to the
corners part C, making sure that the longer side of part C is on the longer side of the
trampoline, as shown. Secure with screws and nuts (part I).
Step
6
Assemble the Center Leg Base
Take two leg extensions (part D) and
connect to the center top rails (part A).
Then attach the corner supports (part N)
to the leg extensions (part D), making
sure to attach the legs to the shorter side
of the corner support. Then connect the
midde support (part Q) to the corners
(part N).
You may not be able to fully connect the middle support (part Q) to the
corner (part N), as it may be too short. You will need to attach the jumping
IMPORTANT:
mat first; see instructions on page 10. After attaching the mat you will
be able to fully attach part Q. Secure with screws and washers.
Step
7
Secure the Frame
Secure all the frame pieces together using the vari-
ous screws, nuts and washers. Ensure that you use
the proper screws for the proper parts- Part I for the
top rails and Parts J and K for the legs.
Make sure to tighten all screws.
9