General Maintenance - Brutus STK 13000 Manuel D'utilisation

EXTRA CUTTING WHEEL STORAGE
The 13 in. Brutus Tile Cutter features a
convenient storage compartment in the
handle, for spare 7/8 in. cutting wheels (Fig 5).
Simply unscrew the handle end to open.
PARTS LIST

GENERAL MAINTENANCE

1. Oil should not be used on the 13000 Brutus Tile Cutter. Use of oil will cause
eventual gumming and sticking of the movable parts as the oil combines with
dirt and ceramic tile dust.
2. Wear is normal in the chrome plated rails and can be evenly distributed by
occasional rotation of each of the two rails. For cutters with hex bolts holding
the rails, loosen each hex bolt and slightly rotate the rails. Retighten the hex
bolts when finished.
3. The only part routinely needing replacement is the carbide scoring wheel. All
other parts are also available, if needed.
CUTTING
WHEEL STORAGE
- 3 -
FIG. 5
1 bolt
2 spring washer
3 flat washer
4 sponge cushion 1
5 sponge cushion 2
6 sliding bar
7 washer
8 guide knob
9 ruler
10 base
11 support
12 nut
13 spring washer
14 slide
15 bolt
16 connecter
17 cutting wheel
18 bolt
19 bolt
20 push bar
21 breaker foot
22 handle base
23 handle cover
24 flange nut