Hardware Installation; Pole Mounting - Sunmax SolarPoint SM-SP-40 Mode D'emploi

Table des Matières

Publicité

Hardware Installation

Note:
Prior to use, it is recommended to write down the
factory default password for this device. The password can
be found on the sticker located under the SolarPoint cover.

Pole Mounting

1. Open the Metal Strap and feed it through the mounting slots
on the back of the SolarPoint.
2. Wrap the Metal Strap around the pole. Use a 7 mm socket
wrench to turn the screw clockwise and securely fasten the
strap to the pole.

Publicité

Table des Matières
loading

Table des Matières