Hardware Installation - IOGear GVE330 Guide De Démarrage Rapide

Hardware Installation

1. Connect the HDMI Input Port on the Transmitter to the HDMI Output Port
on your video source using HDMI cable.
2. Connect one end of the Ethernet cable to the HDBaseT Output Port on
the Transmitter. Next, connect the other end to the HDBaseT Input Port
on the Receiver.
3. Connect the HDMI Output Port on the Receiver to the HDMI Input Port on
your video display using HDMI cable.
4. Plug the power adapter cable into the power jack and secure with locking
washer on both the Transmitter and Receiver. Plug the power adapters
into available power outlets.
Note: Maximum Cat 5e/6 cable distance for 4K resolution: 35m (114ft)
Maximum Cat 6a cable distance for 4K resolution: 40m (130ft)
Maximum Cat 5e/6 cable distance for 1080p resolution: 60m (195ft)
Maximum Cat 6a cable distance for 1080p resolution: 70m (228ft)
3