MA grandMA3 Guide Rapide page 17

2. Tap OK .
3. Shut down the Windows system.
The grandMA3 onPC rack-unit powers down.
Important:
Do not switch off the grandMA3 onPC rack-unit too early.
Make sure that you wait until Windows has completely shut down.
The display and the fan on the grandMA3 onPC rack-unit must have turned off.
4. Set the power switch to position O.
Update the software
The installer package always installs the latest version of the onPC software and the Windows updates!
1. To update, download the latest software version from www.malighting.com.
The required installer is called grandMA3 onPC Windows Hardware Image x.x.x.x.
2. Save the full software image on your computer's hard drive.
3. Extract the entire data from the zip file and copy it onto a USB flash drive (FAT32 formatted, minimum 8 GB).
4. Insert the USB flash drive.
5. Power up the grandMA3 onPC rack-unit.
6. If necessary, tap F8 to choose Boot device and select boot from USB.
7. Follow the onscreen instructions during the update process.
To learn more about the update process, read the Update grandMA3 onPC windows hardware topic in the online user manual.
17
Intended Use
Safety
Support
Transport
Limitations
Quick Start
Maintenance
Disposal
Technical Data
Conformity