AIRIS Xtreme N1700 Mode D'emploi page 33

Initializing TPM
On the first run of the program you will need to initialize the TPM.
1. Run the application from the Security Manager shortcut on the desktop, or from the TPM
Secure Tools item in the Start > Programs/All Programs menu.
2. If the Wizard does not appear click Initialize Owner, and then click Next.
3. Type a TPM Owner Password, and then retype to confirm the password.
4. Click Next > Next to begin the owner initialization process.
5. Click Finish to start the user Initialization process.
6. Click Next.
7. Type a TPM User Password, and then retype to confirm the password.
8. Click Next > Next to begin the user initialization process.
9. Click Finish.
10. Enter the user password and click Logon (click Logon in the top menu to log on at any time).
Figure 13 -
Emergency Recovery
Token Location
TPM User Initialization & Logon
Concise User's Guide
Password Warning
Do not lose the password.
If you do so you will be
unable to make adminis-
trative changes unless
you clear the TPM. This
could then result in data
loss.
Recovery Token
Note the location of the
emergency recovery to-
ken. It is recommended
that you save the file to
removable media such as
a USB Flash drive (or
backup using the tool pro-
vided).
TPM (Trusted Platform Module) - 27