K Source VS50001 Guide D'installation page 9

4. Spec. Description
MODEL NAME
Sensor
Wi-Fi
SDRAM
Audio
RTC
SPI NOR Flash
Video Size
Video Size
Camera Resolution
APP Interface
Memory Card
TV OUT
Micro USB
Battery Capacity
Operating Temperature
5. Caution
Paying attention to caution and warning symbols will help to prevent damage to your
device and loss of data during operation.
ICON EXAMPLE
Caution!
Warning!
(required procedure)
1. Before first use, format memory card using your smart device App.
2. Must stop recording before removing micro SD card.
3. Leaving memory card in the system at all times may wear it down. Remove it when
not in use.
4. For safety, do not operate while driving.
5. Do not disassemble – damage to the product may result.
6. The first time you use the product, be sure to do so with the phone APP link time
correction in the system.
7. Your files can be locked with the APP – this will prevent accidental erasure or deletion.
8 . Low battery status can be monitored by smart device APP or by flashing green light (2)
on the mirror.
9. After viewing the video through the APP, to turn off the function, please turn off
the phone APP and then turn off the system wireless function.
10. Use of an unapproved battery or charger may present a risk of fire, explosion, leakage,
or other hazard.
VS50001/VS50002/VS50003
Aptina 1/3 Inch AR0330 CSP
2.4GHz IEEE 802.11 b/g/n
2MB SPI Flash Memory
1920×1080 30fps (1080P), 1280×720 30fps (720P), 640×480 30fps (VGA)
5M, 3M, 2M,1.3M,VGA
Supports iOS and Android
This product supports Micro SD Card
(8GB ~ 64GB, CLASS 10 above)
• 2.0 high speed transceiver, supports USB Mass Storage
BL-5C 1100 mAh (about 100 minutes)
32°F~113°F / 0~45°C
9
32MB DDR SDRAM
Supports recording
Built-in system clock
Supports NTSC/PAL
• Charger