patura 144250 Mode D'emploi page 28

Installation and mounting Instructions
2. Secure by inserting the two bolts through a spring washer and washer (supplied with the
solar panel kit).
3. Apply the bolt arrangement through the case bracket and the bracket holes in the top side
of the energizer. Tighten them into the built-in nuts on the underside of the energizer lid.
No power tools required. Use of a hand tool is recommended for
securing the bolts.
4. Take the solar panel and place the panel bracket onto the back of the underside of the
panel, and over the four bolt holes.
40 W solar panel
28
65 W solar panel