Package Contents; Safety Instructions; Frequently Asked Questions - i-tec MYSAFE Mode D'emploi

Quick Start / MySafe USB 3.0 3.5" External Case
6. Use max. capacity of Volume and click „Next".
7. Select „Assign the following drive letter" and click „Next".
8. Select „Format this volume with the following settings" (use original settings). Click
„Next" and „Finish".
9. Format of HDD will process. Format time depends on capacity of volume. After finish
is HDD visible in OS.

PACKAGE CONTENTS

• External Enclosure for 3.5" HDD
• Power Adaptor
• USB 3.0 cable
• Set of screws for mounting
• Stand
• User Guide
External power supply exclusively for use with MYSAFE35U401.

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and falling
to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user manual.

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en on the "FAQ" tab of this product.
EN
5