RG-124725
LIST OF COMPONENTS
1.
Grill units
2.
Dinner plate
3.
Power cord and plug of the grill unit
4.
Central base
5.
On/off button
6.
Wooden spatulas
BEFORE USE
1.
Make sure that there is enough ventilation around the appliance.
2.
The appliance should not be placed on an untreated wood surface. Place the appliance on a level and heat
resistant surface.
3.
Operate the appliance before first use for approximately 10 minutes in order to burn off production
residues. Make sure there is good ventilation. The appliance may emit some smoke and a characteristic
smell when you switch it on for the first time. This is normal and will stop soon.
GRILL
1.
Before assembly or disassembly, unplug the appliance and wait until the appliance has cooled down.
2.
Place the central base in the middle of the dinner table. And put the multi-plug socket in the central base.
(Fig.1)
3.
Place the grill units around the central unit on the dinner table.
4.
Connect the plugs of the grill units to the multi-plug socket. Place the wires properly through the slots. (Fig.
3)
5.
Place the dinner plate onto the central base.
6.
Connect the plug of the multi-plug socket to the wall socket.
7.
Switch the on/off button on grill unit to position "I", the indicator illuminates and the grill plate heats up.
8.
When the grill plate has preheated for about 5-7 minutes, you can put your food on the grill plate to start
cooking.
9.
Use the spatula to turn the food during the grilling process.
10. Grill the food until it is ready for consumption. The required time depends on your wishes. Small pieces will
grill better and more quickly than large pieces.
11. To turn off the appliance, turn the on/off button to position "O", and then unplug the appliance.
Note:
1.
The grill unit can be used separately. Directly connect the plug of the grill unit to the wall socket.
2.
Raw food or cooked food can be placed in the dinner plate. But do not mix them together, raw food only
or cooked food only.
(Fig.1)
- 4 -
(Fig.2)
EN