How To Assemble; How To Use - ALPATEC BAP 16 Mode D'emploi

notice_BAP16-reso 12/12/05
- Fix the tube (6) with the base (4) using the screws (5). Place the cap (7).
- Position the weighed base insert (3) under the base (4) and secure with the L screw (1) and the washer
(2).
- Assemble the fan head (11) onto the extension tube (9), tighten the screw knob to lock head onto the
extension tube (10).
- Adjust the fan high with the high switch (8)
- Adjust the fan head in order to reach the air flow right direction.
- To adjust the speed, simply turn the switch at the rear side of the appliance. The fan has 4 positions :
0 = off
1 = low speed
2 = middle speed
3 = high speed
- Always unplug the appliance before cleaning.
- Use a soft damp cloth, if necessary use soapy water.
- Never use abrasives or solvents
10:34 Page 7

HOW TO ASSEMBLE

HOW TO ASSEMBLE

HOW TO USE

HOW TO USE
CLEANING
CLEANING
7