Charging The Battery; Using A Micro Sd/Sdhc/Sdxc Card; Transfer Of Data Between Device And Computer; Touchscreen - Intenso TAB 1024 Mode D'emploi

5.) Charging the battery

Fully charge the battery of the device before using it for the first time. To this end connect the
supplied power cable with the device and a socket. The complete charging process takes about
7 - 8 hours. The charging status is displayed at the front left side of the device. The LED lights up
Red during the charging process, and changes to Yellow as soon as the battery is fully charged.
Notes
a. With 15% remaining residual power of the battery you will get a warning message on the display. To recharge the battery, you
should now connect the device using the AC adapter to an electrical outlet to avoid possible data loss and increase the battery life.
b. You can use the device while charging the battery. To ensure long-lasting battery life, we ask you not to use the device.
c. To ensure good performance, the built-in battery must be used frequently. If you use the device often, please charge the battery
fully at least once a month.
d. Make sure you use only the included AC adapter for charging.

6.) Using a Micro SD/SDHC/SDXC Card

This device can read data directly from a Micro SD/SDHC/SDXC card with a maximum capacity of
64 GB. To use a Micro SD/SDHC/SDXC card, please insert the card in the designated Micro SD Slot
on the left side of the device. Use the pre-installed Explorer to access the data on the memory
card. To do that, please select the directory "SD Card" in the Explorer.

7.) Transfer of Data between Device and Computer

1.) Connect the device using the included USB cable to a computer.
2.) On the device the screen for the USB connection is now displayed. Tap briefly "Turn on USB
Storage". The device is recognized as a removable disk and you get the info "USB memory in use".
After briefly tapping the home button you can continue to use your device normally. You have now
have access to the internal memory of the device from your computer and can copy, delete or
transfer files to your device.
3.) Select the function `Remove safely´
Note: The pre-installed applications and the Android™ operating system take up some of the existing internal memory. For this reason,
you cannot dispose of the entire internal memory.

8.) Touchscreen

This device is operated via touchscreen. You can easily start applications by tapping the
touchscreen lightly with your fingers, enter texts on the virtual keyboard and switch between the
individual main screens by wiping in the respective direction.
Please remove the protective film from the display before using the device.
The touchscreen detects small electrical charges, as for example emitted by human fingers, and
thus determines the input point.
Use for input ideally your fingertips. Operation with a pen or other sharp objects is not possible.
on the computer to separate the device from the computer.
EN - 5