1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 2 Fitting brackets
- 1 threaded fastener M6
- 4 rubber inserts M5
- 1 piece of self-adhesive protective plastic film
Fitting instructions
- Place the inserts and the threaded fastener on the seat cowl as shown on the photo.
Location of the rubber inserts
Location of the threaded
fastener
- Place the fitting brackets on the seat cover as indicated on the picture and fix them thanks to the provided
screws. Mount the steel washer on the threaded fastener with the screw FHc, and stick the rubber pads.
Location of the rubber pads
- Place the seat cover on the motorcycle.
- The provided protective plastic film can be cut and pasted between the original fairing and the edge of the
cover to protect the original fairing against possible scratches.
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of our
painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
FITTING INSTRUCTIONS
ADAPTABLE ON GSX-S 750 2017 → ∞
- 4 screws BHc 5×15
- 1 screw FHc 6×15
- 1 steel spacer Ø 8mm ; L10mm ; Ø ext 14mm
- 2 self-adhesive rubber pads
« CAUTION »
Date : 27/06/17
ERMAX SEAT COVER
Estimated mounting time : 30 min
EN