Product Use - Mc Haus AMAZONIA Manuel D'utilisation

INDICATORS AND BUTTONS
START: Plug in the machine, you will hear a beep and the indicators will light for 3 seconds. All lights
(except the power light) will then go out and the machine will be in standby.
ON/OFF: In standby mode, press the ON/OFF button and the machine will switch to automatic mode.
On automatic the fan will rotate at an average speed of 120 seconds and then the speed will be adjusted
according to the air quality (shown on the AQI). Turn off the machine with the ON/OFF key.
FAN SPEED: Press this button to change the fan speed manually or select the automatic mode.
TIMER: Press this button to set the working time of the air purifier. Each time the button is pressed, an
hour will be added to the indicator light for up to 8 hours. The timer indicator light will change as the time
decreases (1h at a time). When time runs out, the machine will shut down automatically.
SLEEP: This button has two functions:
1. Night mode activation. Press the SLEEP button, the SLEEP mode indicator light will illuminate,
the machine will operate at low speed and all indicator lights will dim. Press any button and the
machine will switch to the previous mode.
2. Notice for replacement of filters. The light will flash when the filters need to be replaced. The
system records the hours of use of the filter until it reaches 2000h, at which time it will have to
replace them. When replaced, you will hear a beep indicating that the reset is complete and the
indicator lamp will stop flashing.
ANION: Press this button to activate and deactivate the anion function.
AQI: Luminous marker indicating air quality. In automatic mode the machine operates according to the
AQI marker, as shown in the following table:
Air quality
Levels of odour contamination
VOC Indicator Color
Speed

PRODUCT USE

Good General
100~95% 96~90%
Blue Orange
Low Medium
AMAZONIA
Bad
≤89%
Red
High