Connecting The Camera; Option 1: Connecting Cameras To An; Nvr - Lorex LNZ3522B Manuel D'utilisation

5 Connecting the Camera

Note
It is recommended to connect the camera to your NVR and test
the Pan-Tilt controls before permanent installation. For instructions
on how to setup Pan-Tilt controls, see 7 Controlling the PT Cam-
era with an NVR, page 17.
5.1 OPTION 1: Connecting Cameras to an NVR
1. Connect the Ethernet connector on the camera cable to the in-
cluded Ethernet extension cable.
2. Connect the Ethernet extension cable to one of the PoE ports on
the back panel of your NVR.
Note
You can use a single CAT5e Ethernet cable up to 300ft (91m) to
connect the camera to your NVR. The camera is compatible with
Lorex LNR100 & LNR400 Series NVRs only.
#; r. 1.0/19290/19290; en-US 6