Installing The Serial Touch Driver For Windows 2000, Me, 95/98 And Nt 4.0; Installing The Usb Touch Driver For Windows 2000, Windows Me And Windows 98 - Elo Touch Systems Entuitive 1525C Guide D'utilisation

Your Elo touchmonitor is plug-and-play compliant. Information on the video
capabilities of your touchmonitor is sent to your video display adapter when
Windows starts. If Windows detects your touchmonitor, follow the instructions
on the screen to install a generic plug-and-play monitor.
Refer to the appropriate following section for driver installation instructions.
Installing the Serial Touch Driver for Windows 2000, Me,
95/98 and NT 4.0
N : For Windows 2000 and NT 4.0 you must have administrator access rights to install the
OTE
driver.
Insert the Elo CD-ROM in your computer's CD-ROM drive.
1
If the AutoStart feature for your CD-ROM drive is active, the system
automatically detects the CD and starts the setup program.
Follow the directions on the screen to complete the driver setup for your
2
version of Windows.
If the AutoStart feature is not active:
Click Start > Run.
1
Click the Browse button to locate the EloCd.exe program on the CD-ROM.
2
Click Open, then OK to run EloCd.exe.
3
Follow the directions on the screen to complete the driver setup for your
4
version of Windows.
Installing the USB Touch Driver for Windows 2000,
Windows Me and Windows 98
Insert the Elo CD-ROM in your computer's CD-ROM drive.
1
If Windows 98, Windows Me or Windows 2000 starts the Add New
Hardware Wizard:
Choose Next. Select "Search for the best driver for your device
2
(Recommended)" and choose Next.
When a list of search locations is displayed, place a checkmark on "Specify a
3
location" and use Browse to select the \EloUSB directory on the Elo
CD-ROM.
2-9