Denon Professional DN-900R Guide D'utilisation page 13

Display Properties (Recording/Paused)
Press Display to switch to an enlarged level meter display.
1. Recording Input: Displays the selected Preset Setting > Audio Input. Select from UBAL:
Unbalanced / BAL: Balanced, AES: AES/EBU, Dante: Dante Network, and COAX: Coaxial.
2. Recording File: Displays the selected Preset Setting > Rec Format. Select from MP3 and
WAV.
3. Recording Format: Displays the Preset Setting > Rec Format. Select from MP3: Bit rate
and WAV: Number of quantization bits.
4. Recording Channel: Displays the Preset Setting > Rec Channel. Select from ST: Stereo,
MONO: Mono (LCh), and MIX: LCh RCh Mix.
5. Auto Track: Displays ATK when Preset Setting > Auto Track is on.
6. Status Display: Displays the operating status.
7. Folder Name: Displays the path to the selected folder.
8. Track Name: Displays the progress bar when set to anything other than off in the Auto
Track > Preset Setting.
9. Remaining Time: Displays the remaining recordable time on the selected media. The
display format can be set in Preset Setting > Time Display. "---:--:--" is displayed if the
format cannot be applied to the remaining time display.
10. Elapsed Time: Displays the elapsed recording time for the current track. The display format
can be set in Preset Setting > Time Display.
11. Time/Date: The recording start date and time are displayed during the recording operation.
Stop
Cue
Pause
Audible Pause
Search
Play
Record Pause
Record

CUE
ǁ
►ǁ
◄◄ ►►
►
●
ǁ
●
13