Powerhouse IR7243W Guide De L'utilisateur page 2

Introduction
The Infra-Red Mini-Controller lets you remotely control lights and appliances
from the control of your armchair. Place it near your home entertainment
system or by your bedside as you like. With your Infrared Universal Remote
Control (X10 compatible), or by pressing the buttons on your Mini-Controller,
you can turn off your appliances or lights around your home without getting
out of your easy chair. You can turn off your child's radio, TV or night light
from your bedroom. You can turn your lights on with the push of a button on
your remote control if you hear a suspicious noise at night. With your Infra-
Red Mini-Controller, you can control virtually all electrical appliances in your
home.
Features
• Lets you remotely control up to 8 X10 Modules (16 with the remote
control) from anywhere in your home. You plug lamps and appliances
into the "Lamp" or "Appliance Modules".
• Receives commands from your Remote Control.
• Sends signals to Modules over your electrical wiring. (No additional
wiring required)
• Turns off everything in the system with one button.
Installation
The Mini-Controller
Installation of your Mini-Controller is easy, simply follow these steps:
1. Using a small screwdriver, choose one of the 16 letters on the Mini-
Controller Housecode Dial. Select the same housecode as you set for
the Modules and the remote.
2. Plug the power cord into any functioning 230 Vac- 50Hz outlet.
Note: For PRONTO remote control: If the IR7243 is set to house code
P, then all commands coming from a Pronto remote control will be converted
to powerline using the house code you set in the house code screen of a
Pronto remote. When you press a front panel key of the IR7243, the
housecode P will be transmitted.
Infra-Red Mini-Controller IR7243W
2