Manual Cook Entry Mode; End Of Cook Cycle Mode; Preset Program Cook Mode - Waring Commercial WMO120 Mode D'emploi

MANUAL COOK ENTRY MODE

1) The user manually enters the cooking time and power level
while in this mode.
2) While the oven is in Ready Mode, press the TIME ENTRY pad
on the keyboard to enter Manual Cook Entry Mode.
3) In this mode, 00:00 is displayed. Press a number key to set
timer before choosing power level.
4) If you press HOLD 0%, Defrost 20%, Medium 50% or
Med-Hi 70% to choose a power level, the screen will display
your selection. If the same button is pressed twice, the
power will change to PL10, which is 100%. If no power is
chosen, PL10 is the default.
5) Press START to enter Manual Cook Mode. Press STOP to
enter Ready Mode.
MANUAL COOK MODE
1) In this mode, food is cooked. While in Manual Cook Entry
Mode, pressing START begins the Manual Cook Mode.
2) The screen displays the remaining cooking time and power
level. The fan and oven lamp will turn on.
3) When the cooking program is finished, the oven enters End
of Cook Cycle Mode. If you press STOP in this mode, the
oven enters Pause Mode.

END OF COOK CYCLE MODE

1) After the time has expired in the Manual Cook Mode, or the
Preset Program Cook Mode, the oven enters the End of
Cook Cycle Mode.
2) During this mode, DONE is displayed.
3) If either User Option OP:11 or OP:12 is selected, the oven
continues to sound until the user either opens and closes the
door or presses STOP. If User Option OP:10 is selected, after
the 3-second beep, the oven will go into Idle Mode.

PRESET PROGRAM COOK MODE

1) This mode cooks food using the touchpad. While in Ready
Mode, pressing one of 10 digital keys on the keyboard will
cause the oven to run the Preset Program associated with
that key.
13