Table des Matières
Publicité
TAII connectors
ATAII_TOP (Port 4) and
TAII_BOTTOM (Port 5))
1.
If you just plan to install one eSATAII device to this motherboard, it is recom-
mended to enable the bottom eSATAII port of the I/O shield. In order to enable
the bottom eSATAII port of the I/O shield, you need to connect one of the orage
SATAII connectors (SATAII_6 (Port 5); see p.2 No.19 or p.3 No.18) and one of the
orange eSATAII connectors (eSATAII_BOTTOM (Port 5); see p.2/3 No.1) with a
SATA data cable first. Then the bottom eSATAII port of the I/O shield is enabled.
Connect the SATA data cable
to one of the orange SATAII
connector (SATAII_6 (Port 5))
2.
If you plan to install two eSATAII devices to this motherboard, you need to enable
both the top and the bottom eSATAII ports of the I/O shield. In order to enable the
top and the bottom eSATAII ports of the I/O shield, you have to connect one of
the orange SATAII connector (SATAII_6 (Port 5); see p.2 No.19 or p.3 No.18) and
one of the orange eSATAII connector (eSATAII_BOTTOM (Port 5); see p.2/3 No.1)
with a SATA data cable first, and then connect the other orange SATAII connector
(SATAII_5 (Port 4); see p.2 No.21 or p.3 No.20) and the other orange eSATAII
connector (eSATAII_TOP (Port 4); see p.2 No.39 or p.3 No.38) with the other
SATA data cable. After that, both the top and the bottom eSATAII ports of the I/O
shield are enabled.
Connect the SATA
Connect the SATA data
data cables to both
cables to both orange
orange eSATAII
SATAII connectors
connectors (eSATAII_
(SATAII_6 (Port 5) and
BOTTOM (Port 5) and
SATAII_5 (Port 4))
eSATAII_TOP (Port 4))
ASRock P45XE-WiFiN / P45XE-R / P45XE Motherboard
Connect the SATA data
cable to one of the
orange eSATAII connector
(eSATAII_BOTTOM (Port 5))
3 1
3 1
3 1
3 1
3 1
Publicité
Table des Matières
