External Exhausting Version - Sholtes HD 59 Instructions Pour L'installation Et L'emploi

External exhausting version

In this case the fumes are conveyed outside by means
GB
of a special pipe connected with the connection ring
Diagram 2
located on top of the hood (Diagram 2).
Diameter of the exhausting pipe must be equal to that
of the connection ring = 150mm.
In the horizontal runs the exhausting pipe must be
slightly slanted (about 10°) and directed upwards to
vent the air easily from the room to the outside.
Attention!
If the hood is supplied with active charcoal filter,
then it must be removed.
20