Publicité
Les langues disponibles
Les langues disponibles
Installation of Thermo Trough Drinker Model 6523
Special note for ground fixation
SUEVIA Trough Drinker has to be mounted on a basement of 250 cm x 90 cm +10/+20 cm (l/w/h).
For the fixation of Thermo Trough Drinker you need 10 screws M12.
Protect with a protection bar against animals jumping into the through. See schemes on the page 10.
Water Connection
Equipped as standard with SUEVIA MAXIFLOW float valve Modell 700,
providing a generous flow of 40 l/min.
SUEVIA MAXIFLOW float valve has got a ¾" male water connection.
Water connection is done from the bottom.
SUEVIA Water Filter Ref. 101.0487 should be installed before the MAXIFLOW float valve. Kindly take care of DIN 1988!
Water Level Adjustment
Water level can be adjusted by changing the height of the floater.
Loose the hexagon nut Ref. 102.0621, adjust the floater at desired height
and tighten the nut on again.
Take care of the following:
Float valve has to be placed that way that it is situated in a 90° angle to the
valve lever Ref. 102.0393.
Water pressure max. 5 bar (73 psi)
Attention!
Rinse water line well before connecting the Float Valve!
¾"
Water
connection
Basement
The water can be well directed down by installing on site at the drainage hole a drain tube DN 125.
4
contents 150 l
Drainage hole
Removal of drainage plug
Water
connection
Basement
+10/+20
Tube
Mod.6523
DN 125
to be provided
on site
Drainage hole
SUEVIA
SUEVIA
U S E V IA
102.0393
102.0621
S E
U V
I
A
Height adjustment
View from above
Dimensions in cm
70
31
35
90
¾"
6
12
250
230
15
Publicité
