Directions For Use; Functions And Features - KLARBACH LB31508 we Mode D'emploi

DIRECTIONS FOR USE

SET UP
Select a firm, level, flat location - at least six inches (15 cm) from any wall or
object for proper air flow. Place the humidifier on a water-resistant surface, as
water can damage furniture and some flooring. Do not place unit directly on
carpet, towels, blankets or other absorbent surfaces.
We will not accept responsibility for damage caused by water spillage.
FILLING
Make sure unit is unplugged.
1. Separate the tank from
the base of the unit.
3.Pour cool, clean water
directly into the tank. Do not
pour anything but water into
the tank.
2. Flip over water tank and open the
tank lid, turning it to the left.
4.Close the tank lid, turning it to the
right.
It is important to FIRMLY secure
cap after filing the tank with water.
17
5.Attach tank to base of unit.
6.Before turning on make sure there is water in the unit.

FUNCTIONS AND FEATURES

2-Speed Mist Control
The mist control(Low or High) can be selected by pressing the button according
to the Mode Chart below.
#of Power Button
MODE
Pushes
Mode 1 1
Mode 2 2
Mode 3 3
Mode 4 4
Water Shortage
When the unit is low on water, the Refill indicator LED on the body will change
from green to red, and the unit will shut off. Simply add more water to continue
use.
Mist Director
The mist director can be selected through 360 degree by turning the spout.
Cleaning Brush
The ultrasonic disk cleaning brush is a small brush which comes in the carton
with the humidifier.
Night Light
See Mode Chart above. The night light can be turned on and off with the power
button on the front of the humidifier. The LED indicator light changes color
while on.
ENG
Setting Night Light
Low Speed OFF
Low Speed ON
High Speed ON
High Speed OFF
18