Typical Battery Connections - Samlex America SSP-100-KIT Guide De L'utilisateur

Masquer les pouces

Table des Matières

Les langues disponibles

SECTION 9 |

Series Connection of Batteries

When two or more batteries are connected in series, their voltages add up but their Ah capacity remains the

same. Fig. 9.1 above shows 2 pieces of 6V, 200 Ah batteries connected in series to form a battery bank of 12V

with a capacity of 200 Ah. The Positive terminal of Battery 1 becomes the Positive terminal of the 12V bank.

The Negative terminal of Battery 1 is connected to the Positive terminal of Battery 2. The Negative terminal of

Battery 2 becomes the Negative terminal of the 12V battery bank.

Solar Charge Controller

Parallel Connection of Batteries

SCC-30AB (rear view)

Solar Charge Controller

SCC-30AB (rear view)

When two or more batteries are connected in parallel, their voltage remains the same but their Ah capacities

add up. Fig. 9.2 shows 4 pieces of 12V, 100 Ah batteries connected in parallel to form a battery bank of

12V with a capacity of 400 Ah. The four Positive terminals of Batteries 1 to 4 are paralleled (connected

together) and this common Positive connection becomes the Positive terminal of the 12V bank. Similarly, the

four Negative terminals of Batteries 1 to 4 are paralleled (connected together) and this common Negative

connection becomes the Negative terminal of the 12V battery bank.

Solar Charge Controller

SCC-30AB (rear view)