System Settings - Audiophony PA WALLKIT Guide De L'utilisateur

WALLKIT - WALLAMPmedia set + 2 ceiling speakers English
5.6 - AUX
Use the M button to select AUX IN mode
Playback control : Use the button to turn the auxiliary source off or on again.
When the source is turned off, the display flashes.
Volume setting : Use and buttons.
Réglage de la sensibilité : Press and hold and buttons to access the sensitivity
setting. Two sensitivity levels are available: S1 (500mV) or S2 (1000mV).

6 - System settings