AmazonBasics B01GG76234 Manuel De L'utilisateur page 5

Operation



Control Switch
 Using the switch located on the unit, select one of the following settings by sliding the switch either
left or right. (FIGURE 2)
I
AUTO / ON:
This setting allows the shredder to be automatically started by
inserting paper into the feed slot. Always feed the paper in as
straight as possible. When the paper has passed through, the
shredder will automatically stop.
O
OFF:
FIGURE 2
This setting turns off all features of the shredder. For safety
reasons, we recommend that you leave the shredder in the "Off"
position whenever the shredder is unattended or not in use.
R
REV (REVERSE):
In the unlikely event of a paper jam, the reverse setting can be
used to help clear the cutters of paper that did not pass through.
Never attempt to clear a jam by using the reverse function until
you have emptied the wastebasket.
CONTINUED NEXT PAGE
8 ENGLISH
Operation

Paper / Credit Card Entry:

Make sure you do not exceed sheet
count per pass (8 sheets max).
Insert paper as straight as possible
into feed slot and release.
LED Status Indicator:
Overheat:
Red light – Shredder has shred continuously beyond the maximum shred time
and needs to cool down before operation can restart. If this happens, switch
the shredder off for 30 minutes or longer before resuming normal operation.
 Note:
• Always turn off and unplug the shredder when not in use.
• This shredder will shred staples and small paper clips. It is recommended that you remove
paper clips whenever possible to extend the lifespan of your shredder.
• Only shred credit cards by feeding them vertically i nto the middle of the feed slot, releasing
when shredding begins. Never feed more than one credit card at a time.
• Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in
extensive damage to the shredder. Overfeeding will strain the machine and quickly wear
and break the cutting blades and internal components.
• Overheating with extended use: In the event that the shredder has shred continuously
beyond the maximum running time and overheating, the unit will automatically shut off.
If this happens, switch the shredder off for 30 minutes or longer before resuming normal
operation.

Insert one credit card at a time into
the middle of the feed slot.
ENGLISH 9