Making Pasta - KitchenAid KSMPRA Manuel D'utilisation

USING THE PASTA ROLLER AND CUTTERS
Insert attachment shaft housing into
the attachment hub, making certain
the power shaft fits into the square
hub socket. If necessary, rotate the
3
Pasta Roller or Cutter back and forth.
The pin on the attachment housing
fits into the notch of the hub rim
when in the proper position.

MAKING PASTA

IMPORTANT: When using the Pasta Roller and Cutters, do not wear ties, scarves, loose
clothing or long necklaces; gather long hair with a clasp.
Prepare pasta dough (see "Recipe"
1
section). Cut dough into sections
that fit in the Pasta Roller.
6 | USING THE PASTA ROLLER AND CUTTERS
W10818898B_ENv03.indd 6
Tighten the Stand Mixer
attachment hub knob until
4
the attachment is completely
secured to the Stand Mixer.
Pull the Pasta roller adjustment knob
straight out and turn to setting 1.
Release the knob, making certain
the pin on the Pasta roller housing
2
engages the opening on the back
of the adjustment knob, allowing
the knob to fit flush against the
roller housing.
2/24/16 10:03 AM