16
INSTALLATION
Assembling the Right Refrigerator
Door
Install the right-side door first.
1
Make sure that the plastic sleeve is
inserted in the bottom of the door. Lower
the door onto the middle hinge pin as
shown in the figure.
2
Fit the hinge
over the hinge lever latch
and slot it into place. Rotate the lever
counterclockwise to secure the hinge.
Hinge Lever Latch
3
Connect the wire harness
4
Make sure that the door-switch located
inside the cover is tightly connected.
Position the cover in its place. Insert and
tighten the cover screw
.
.